Pronic Servo-Driven, In-Die Tapping Unit
Stock Number: 21237
Pronic EM1B
Serial No. EMB661 Age: 1997
Condition: Very Good
Price: $1,950
Click to view larger photo
Request a quote on stock# 21237
| Specification | Description |
|---|
| Tapping Unit Type | EM1B, 1 x 5/16-18 |
| Motor Rotation | Normal |
| Ratio Tap to Screw | 0.37 |
| | |
| CONTROLLER: | |
| Type | PRC1, V2.2 |
| Voltage | 220 V - 3 phase |
| Operating Current | 8.3 amps |
| Surge Current | 16.7 amps |
| | |
| MOTOR: | |
| Max Speed | 3000 RPM |
| Continuous Torque | 2.2 Nm |
| Peak Torque | 7.5 Nm |
Equipped With:
*Pronic PRC1 Controller - used to program, setup, and operate application
*Motorized by a brushless servo motor, driven by the electronic controller
*The press initiates operation through a proximity sensor
*Tapping doesn't depend on press stroke, but only its speed
*Tap breakage detection
*Emergency stop
*Operating manual and instructions
These High-Tech Tapping Devices are Ideal for:
*Very long or short strokes
*Dies used on several presses, with different strokes
*Transfer presses
*Wide strip, with a tapping in the middle
*Tapping done out of the press
There are 3 controllers and 3 motors. All 3 units can be used together as a synchronized multi-motor application.
F.O.B. Mound Avenue Warehouse
Racine, WI
Lakeshore Machine Tool, LLC
1220 Mound Avenue
Racine, Wi 53404
Phone: 262-635-8801
Fax: 262-635-8808
sales@lakeshoremachinetool.com
Asset Sales and Marketing Software for Used and Surplus Industrial Machinery and Equipment Dealers
www.MacDB2000.com
